31
Using BIOS
SATA Configuration
Use this item to show the mode of serial SATA configuration options.
SATA Configuration
Onchip SATA Channel [Enabled]
SATA Mode [IDE]
SATA Port1 Not Present
SATA Port2 Not Present
SATA Port3 ST380013AS (80.0GB)
SATA Port4 Not Present
External SATA Port Not Present
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Enabled/Disabled SATA
Controller
Main Advanced Chipset Frequency/Voltage Control Boot Security Save & Exit
Version 2.10.1208. Copyright (C) 2010, American Megatrends, Inc.
+/- : Change Opt.
:Select Screen
:Select Item
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Enter : Select
Onchip SATA Channel (Enabled)
Use this item to enabled or disable the onchip SATA channel.
SATA Mode (IDE)
Use this item to select SATA mode.
SATA Port1~4 (Not Present/ST380013AS)
This motherboard supports four SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel,
and each channel allows one SATA device to be installed. Use these items to configure
each device on the SATA channel.
Press <Esc> to return to the Advanced Menu page.
External SATA Port (Not Present)
This item shows the External SATA device status of this channel.
To Next Page
Loading...
Need help?
General
