Primary/Secondary Master/Slave UDMA (Auto)
Each IDE channel supports a master device and a slave device. This mother-
board supports UltraDMA technology, which provides faster access to IDE
devices.
If you install a device that supports UltraDMA, change the appropriate item on
this list to Auto. You may have to install the UltraDMA driver supplied with this
motherboard in order to use an UltraDMA device.
IDE Burst Mode (Enabled)
This option, when enabled will instruct the system to send every write transac-
tion to the write buffer. Burstable transactions then burst onto the PCI bus and
nonburstable transactions do not.
Press <Esc> to return to the Integrated Peripherals screen.
VIA OnChip PCI Device
Scroll to this item and press <Enter> to view the following screen:
Phoenix – AwardBIOS CMOS Setup Utility
VIA OnChip PCI Device
Item Help
VIA-3058 AC97 Audio [Auto]
VIA-3068 MC97 Modem [Auto]
VIA-3043 OnChip LAN [Enabled]
Onboard LAN Boot ROM [Disabled]
Menu Level
↑ ↓ → ← : Move Enter : Select +/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
VIA-3058 AC97 Audio (Auto)
Enables and disables the onboard audio chip. Disable this item if you are go-
ing to install a PCI audio add-in card.
VIA-3068 MC97 Modem (Auto)
Enables and disables the onboard modem. Disable this item if you are going
to install an external modem.
VIA-3043 OnChip LAN (Enabled)
Enables and disables the onboard LAN.
Onboard LAN Boot ROM (Disabled)
Use this item to enable and disable the booting from the onboard LAN or a
network add-in card with a remote boot ROM installed.
Press <Esc> to return to the Integrated Peripherals screen.
41
To Next Page
Loading...
Need help?
General
