ECS P965T-A - Checking Jumper Settings; Jumper Settings

9
Installing the Motherboard
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled.
To avoid the system unstability after clearing CMOS, we recommend
users to enter the main BIOS setting page to “Load Optimal De-
faults” and then “Save Changes and Exit”.
Jumper Settings
Jumper
Type
Description
Setting (default)
1
JP1
1-2: CMOS CLEAR
2-3: NORMAL
Before clearing the
CMOS, make sure to
turn off the system.
JP1 3-pin CLEAR CMOS