EDAN F3 - Exporting Files; Switching Off; Changing Settings; Adjusting Alarm Volume

Fetal Monitor Quick Reference Card
6 / 8
Exporting Files
1 Plug the USB disk into the USB socket of the monitor.
2 Select the file managing key to open the File Management
interface.
3 Select the required item and then select Export, or select Export
All, to export the record(s) to the FetusData folder of the USB
disk.
4 Select Remove Disk on the File Management interface.
5 Unplug the USB disk.
Switching Off
1 Press and hold the POWER switch
for at least 1 second.
2 Remove the power cord.
Changing Settings
To change the settings, you should rotate and press the control knob
on the related items in sequence:
1) Adjusting Alarm Volume
> Alarm > Alarm Volume > select > OK
2) Changing Alarm Silence Duration
> Alarm > Silence Duration > select > OK
3) Changing Alarm Message Form
> Alarm > Message Form > select > OK
4) Switching On / Off FHR Alarm
> Alarm > FHR > Alarm > select > OK > OK