Need help?Do you have a question about the EDAN M3A and is the answer not in the manual?
General| Type | Vital Signs Monitor |
|---|---|
| SpO2 Measurement Range | 0-100% |
| Parameters | SpO2, Pulse Rate, Temperature |
| Pulse Rate Measurement Range | 30 to 250 bpm |
| Temperature Measurement Range | 0 to 50°C |
| Power Supply | AC 100-240V, 50/60Hz |
| Battery Life | Up to 8 hours |
Specifies monitor's purpose, parameters, and suitable environments.
Provides essential safety instructions for operation and environment.
Procedures for unpacking and inspecting the monitor and accessories.
Steps for connecting the monitor to the power supply.
Instructions for turning the monitor on and initial checks.
Guidance on connecting patient sensors to the monitor.
Overview of the monitor's integrated functions and portability.
Description of the main display areas and parameter presentation.
Detailed explanation of each button's operation on the front panel.
Location and purpose of various sensor and connection ports.
Details battery operation, safety, and maintenance.
Configuring patient identification and type settings.
Configuration options for NIBP measurement parameters.
Configuration options for SpO2 measurement parameters.
Configuration options for temperature measurement.
Setting and managing alarm limits for all parameters.
Options for managing stored patient data.
Settings related to the built-in recorder function.
Overview of alarm levels, types, and notification methods.
Identifies conditions that trigger physiological and technical alarms.
How to temporarily silence audible alarms.
How to disable audible alarms completely.
Procedure to reset active alarms.
How parameter alarms function when enabled.
Steps to take when an alarm is active.
Procedure to verify alarm system functionality.
Displaying historical data in a tabular format.
Visualizing trends using graphical representations.
How to use the printer for data output.
Visual checks and safety inspections for the monitor.
Schedule and tasks for qualified service personnel.
Instructions for cleaning the monitor and its accessories.
Guidelines for disinfecting the monitor and accessories.
How to replace the internal fuse.
Instructions for cleaning the battery and its compartment.
Crucial safety warnings for SpO2 sensor use.
Step-by-step guide for performing SpO2 measurements.
Factors that can affect SpO2 measurement accuracy.
Methods to evaluate the reliability of SpO2 readings.
Explanation of delays in SpO2 alarm notifications.
Information on the Perfusion Index as a signal quality indicator.
Configuration settings for SpO2 monitoring.
Overview of SpO2 and PR alarm settings.
Basic principles of NIBP measurement using the oscillometric method.
Critical safety precautions for NIBP measurements.
Conditions that may hinder or affect NIBP accuracy.
Steps for obtaining accurate NIBP measurements.
Configuration of NIBP measurement intervals and units.
Setting and understanding NIBP and PR alarm limits.
Using the T2 module for oral, axillary, and rectal temperature measurements.
Using the TH module for infrared ear temperature measurements.
Using the F3000 module for temperature measurements.
Functionality of the nurse call port.
Connecting the monitor via a network port.
Integration with a central monitoring system.
List of recommended SpO2 sensors and cables.
List of recommended NIBP cuffs and hoses.
List of recommended temperature probes and accessories.
Miscellaneous accessories like cables and trolleys.
Details of the product warranty coverage.
How to contact EDAN for support and service.
Classification of the equipment according to safety standards.
Detailed technical parameters of the monitor.
Declaration regarding the monitor's electromagnetic emissions.
Declaration regarding the monitor's immunity to electromagnetic disturbances.
Guidelines for safe distances from RF communication equipment.
Alphabetical list of abbreviations used in the manual.
To Next Page
