To Next PageTo Next Page
Need help?Do you have a question about the EDAN iM8 and is the answer not in the manual?
General| Brand | EDAN |
|---|---|
| Model | iM8 |
| Category | Measuring Instruments |
| Language | English |
Provides essential safety information and precautions for monitor operation.
Details on proper grounding for electrical safety.
Lists critical safety rules and warnings for instrument operation.
Detailed description of monitor buttons and knob operations.
Critical safety warnings and precautions for battery use.
Configuration of alarm volume, levels, and recording.
Guidelines for monitor maintenance and service.
Explanation of different alarm modes, levels, and types.
Details on physiological alarms, causes, and levels.
Information on technical alarms, causes, and troubleshooting.
How to view and interpret trend graphs for patient data.
Instructions for cleaning and disinfecting the monitor and parts.
Critical safety warnings for ECG monitoring.
Guidance on proper electrode placement for accurate ECG readings.
Configuration settings for ECG monitoring parameters.
Analysis and detection of cardiac arrhythmias.
Procedure and setup for respiration monitoring.
Critical safety warnings and precautions for SpO2 monitoring.
Steps for correctly applying and using the SpO2 sensor.
Configuring SpO2 alarm settings, sweep, and pitch tone.
Critical safety warnings and precautions for NIBP measurement.
Factors affecting NIBP accuracy and measurement steps.
Configuring NIBP settings, alarms, and performing tests.
Settings for temperature measurement alarms and units.
Critical safety warnings for invasive blood pressure monitoring.
Preparatory steps for invasive blood pressure measurement.
Procedures for transducer zero calibration and IBP settings.
Introduction to CO2 monitoring and associated hazards.
