What to do if my EDAN iM60 Medical Equipment shows 'PRESSURE OVER RANGE, FAIL'?
If your EDAN Medical Equipment displays 'PRESSURE OVER RANGE, FAIL', ensure the stopcock is vented to the atmosphere. If the issue continues, it may require professional attention from a service technician.
What to do if EDAN iM60 displays 'PULSATILE PRESSURE ZERO FAIL'?
If you encounter 'PULSATILE PRESSURE ZERO FAIL' on your EDAN Medical Equipment, ensure the transducer is vented to air and not connected to a patient. Then, try the zeroing process again.
What to do if my EDAN iM60 Medical Equipment shows 'Art ZERO FAIL'?
If your EDAN Medical Equipment displays 'Art ZERO FAIL', make sure that the transducer is not attached to the patient.
What to do if EDAN Medical Equipment displays 'Art SENSOR OFF, FAIL'?
If your EDAN Medical Equipment displays 'Art SENSOR OFF, FAIL', ensure the transducer is properly connected and not off. Then, proceed with the zeroing process.
General| Category | Patient Monitor |
|---|---|
| Model | iM60 |
| Manufacturer | EDAN |
| Display | TFT LCD |
| Resolution | 800 x 600 pixels |
| Touch Screen | Yes |
| SpO2 | Yes |
| NIBP | Yes |
| Respiration | Yes |
| Temperature | Yes |
| Battery | Rechargeable lithium-ion |
| Battery Life | Up to 4 hours |
| ECG | 3/5-lead |
| Optional Parameters | IBP |
| Networking | Wi-Fi, Ethernet |
| Interface | USB |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Relative Humidity | 15 to 95% (non-condensing) |
Monitors' intended use, parameters, patient types, and environment.
General safety precautions for monitor operation, environment, and connections.
Procedure for connecting the AC power line and specifications.
General information on operating the monitor and navigating its interface.
Measures for personal information safety and network security.
Steps to configure and connect the monitor to a wireless network.
How to control alarms: setting parameter alarms, pausing, and turning off audio.
Details of physiological alarms including ECG, ARR, and others.
Process of admitting a patient and entering required data.
Safety precautions for ECG monitoring, leads, and electrosurgery.
Steps for performing ECG monitoring, including cable connection.
Analysis of ST segment for elevations/depressions and alarm setup.
Monitoring and analysis of cardiac arrhythmias.
Safety precautions for SpO2 monitoring and sensor application.
Procedure for measuring SpO2, including sensor application.
Management of SpO2 alarms using SatSeconds for delayed alarms.
Safety precautions for NIBP monitoring and patient conditions.
To Next Page
