Patient Monitor User Manual Networked Monitoring
- 40 -
4.7 HL7 Communication
The monitor supports HL7 protocol to upload data. Select Menu > User Maintain and input user
maintain password > Security. In this menu:
• Set HL7 to On/Off. To avoid hacker attacking, setting HL7 to Off is normally
recommended.
• Set HL7 Encryption method to Off or TLS (default).
To set HL7 IP address of the client-side, select User Maintain > Network Maintain.
Click Import Certificate to install/upgrade the Certificate via USB flash drive. The certificate
issued by Certificate Authority (CA) is recommended and self-signed certificate should be
avoided. For detailed steps of importing certificates, please refers to service manual.
For more information about HL7 communication, refer to HL7 Communication Protocol Service
Manual.
To Next Page
Loading...
