EDAN iM60 - Trend Table Review

Patient Monitor User Manual Review
- 187 -
■ To display a different parameter’s trend, you can either:
 Select beside the parameter name and choose the desired parameter from the pop-up
list (as shown in red circle above).
 Press the symbols and to switch parameters in batch.
■
Select Zoom to adjust the trend scale. Once the trend scale on the trend graph review
interface is adjusted, the trend scale of the corresponding parameter in
TrendScreen of the
main interface will also change.
■
Select Time Span to change the length of trend data displayed on the current screen. 6 min,
12 min, 30 min, 1 h, 2 h, 4 h, 6 h, 12 h, 24 h, 36 h and 48 h are optional.
■
Select beside Cursor to move the cursor left or right.
■
Select and to scroll the screen left and right manually to browse the trend graph.
■
Select Trend Table to switch to the trend table interface.
■
Select Record to print out the currently displayed trends by the recorder.
■
Select Print to print out the trend graph report by the printer.
21.2 Trend Table Review
To review the trend table, please press the Trend Table key on the screen or select
Menu > Review > Trend Table.
In the trend table review window:
■
Select Parameter and you can choose the required parameters to be displayed in the trend
table.
■
Select Interval to change the interval of the trend data. 1 s, 5 s, 30 s, 1 min, 3 min, 5 min, 10
min, 15 min, 30 min, 60 min and NIBP are optional. Select NIBP to view the trend data
according to the NIBP measurement time.
■
Select , , and to scroll the screen manually to browse the trend table.
■
Select Trend Graph to switch to the trend graph interface.
■
Select Record to print out the currently displayed trends by the recorder.
■
Select Record All to enter the setup menu. Click Record All after setting Start Time and
End Time, then all the trends for that period will be printed out by the recorder.
■
Select Print to print out the trend table report by the printer.
NOTE:
When the interval is selected as 3 min, 5 min, 10 min, 15 min, 30 min or 60 min, the
latest measurement values are displayed in the right of the trend table.