To Next PageTo Next Page
Need help?Do you have a question about the Eden 25439 and is the answer not in the manual?
General| Brand | Eden |
|---|---|
| Model | 25439 |
| Category | Lawn and Garden Equipment |
| Language | English |
Guide to download and install the EDEN Water Timer App.
Instructions for inserting alkaline batteries into the timer controller.
Explains how the timer enters pairing mode with indicators.
Steps to launch the app and connect to the Bluetooth controller.
How to securely connect the timer to an outdoor hose faucet.
Requirement to keep the water supply on for timer operation.
Replace the device icon with a new photo from camera or gallery.
Rename your Bluetooth timer for easy identification (max 12 chars).
Set or reset a password to protect your timer from unauthorized users.
Access device details like firmware version and Bluetooth address.
How to rename valves and replace their photos for identification.
Steps to set up watering schedules for the timer zones.
Choose between 'By Frequency' or 'By Week Day' watering modes.
Select the desired start time for the watering cycle.
Define the length of time each watering cycle will run.
Specify how many times per hour or day watering should occur.
Configure specific days for watering when using 'By Week Day' mode.
Enable Eco mode to create pauses for soil absorption and prevent run-off.
Set custom water and pause durations based on watering needs.
Steps to pair a moisture sensor with the Bluetooth timer for water saving.
Position the sensor in the soil to monitor moisture levels.
Setup moisture levels in 10% increments according to soil requirements.
Check the current moisture status once a sensor is connected.
Manually start watering without interrupting the programmed schedule.
Deactivate manual watering by swiping or pressing buttons.
Instructions for storing the timer during freezing temperatures.
Recommendations for using fresh alkaline batteries and their lifespan.
Explanation of multi-zone watering and pressure flow considerations.
