08
Setting Tub
Buckle Combination
Use of Buckle Combination Lock is
recommended for all users, but
especially for those with children
in the household
The original code is
preset to “00”
Locate the pin in the side, depress the pin with a jewelers screwdriver, pen or
toothpick.
While still depressing the pin, rotate the dial to your desired number.
If a number wheel gets stuck after you adjust the code, push the pin on the opposite
side to release the wheel.
Do this for each side, one for each number.
To change or set:
1.
2.
3.
4.
Repeat above for each buckle
24
To Next Page
Loading...