11
Step 3
Attach one end of the drain hose to the drain port with the clip provided.
Step 4
Insert the rubber plug into the other end of the drain hose and secure clip provided.
Draining the Unit
When the portable air conditioner is in cooling mode, or dehumidify mode, it will remove moisture
from the air. The condensed water from the air will be collected in an internal reservoir and will be
evaporated and exhausted out of the exhaust hose. However, in very humid conditions, the
internal reservoir may fill completely. This causes the air conditioner to turn off to avoid
overflowing the internal reservoir. When the water tank is full a buzzer will sound eight (8) times
and the LED screen will display the error code “H8”.
Direct Drainage
1. Remove the rubber drain plug from the drain port.
2. Connect a drain hose to the drain port.
The portable air conditioner will now drain through the drain hose. Please note that this unit has
no drain pump. All water will drain with gravity only, i.e., only “downhill.”
To Next Page
Loading...
