EdgeStar AP10002BL - Directional Louvers; Remote Control

14
Directional Louvers
Remote Control
The included universal remote control is used to operate all of your portable air conditioner’s
functions. Use the remote control to change modes, fan speed, timer, and temperature settings as
well as to set sleep mode.
Button
Function
On / Off
This button powers the unit on or off.
Mode
This button allows you to cycle through the
following modes: Cool, Dehumidify, and Fan.
Fan
This button allows you to cycle through the
following fan speeds: automatic, Fan 1, Fan 2,
Fan 3, and Fan 4.
Swing
Swing mode is not available for this unit.
Sleep
This button is used to enable sleep mode.
Timer
This button is used to enable the timer.
Increase
This button increases the set temperature, or
the time when the Timer is enabled.
Decrease
This button decreases the set temperature, or
the time when the Timer is enabled.
Note: Be careful not to drop the remote control. Do not place the remote control in a location
exposed to direct sunlight.