EdgeStar AP10002BL - Maintenance

16
Timer
The timer can be used to either turn the unit on or off after a selected number of elapsed hours.
The timer is adjustable between 0.5 – 24 hours in one hour increments.
How to Set the Unit to Automatically Turn On
1. Press the Timer button on the remote control while the unit is powered off.
2. Use the Up and Down buttons on the remote to set the time (displayed in hours) you want
to pass before the unit turns on. After the selected time passes, the unit will automatically
turn on.
How to Set the Unit to Automatically Turn Off
1. Press the Timer button on the remote control while the unit is powered on. The Timer
indicator LED will light up.
2. Use the Up and Down buttons on the remote to set the time (displayed in hours). The unit
will automatically turn off after the selected time elapses.
Sleep
Press this button to turn the Sleep function on or off. When the unit is turned on the Sleep function
defaults to off, and turning the unit off automatically cancels the Sleep function. When the Sleep
function is activated, the Sleep symbol will be displayed on the LED screen. While the unit is in
Sleep mode the timer can be adjusted. The Sleep function is not available when the unit is in Fan
or Auto mode.
Maintenance
Clean the air conditioner and filters regularly to maximize performance and efficiency, and to
prolong the unit’s life. Be sure to always unplug the air conditioner from the power outlet before
cleaning.
Cleaning the Unit
Use a soft dry cloth to wipe the body of the air conditioner clean. If necessary, use lukewarm
water to dampen a cloth to clean the unit.
Use a soft bristle brush to clean between the vents.
Carefully use a vacuum cleaner to clean the condenser coils.
Never use abrasive chemicals, volatile substances, gasoline, detergents, chemically treated
cloths, or other cleaning solvents that may damage the cabinet exterior.
Warning: Never spray water directly on the unit.