EdgeStar AP10002BL - Page 9

6
Step 3
A. If the inner width of the window is less than 28” (718 mm) wide:
1. Remove the adjustment panel from the window panel, and cut the window panel to the
same width as the window. Trim the side farthest from the exhaust opening.
2. Open the window sash and place the window panel on the windowsill.
3. Secure the window panel to the windowsill.
B. If the inner width of the window is between 28” (718 mm) and 36.5” (927 mm):
1. Open the window sash and place the adjustable window panel on the windowsill.
2. Slide the adjustment panel to fit the window frame width.
3. Secure the panel to the windowsill with four large wood screws and four slider brackets.
C. If the inner width of the window is between 36.5” (927 mm) and 64” (1625 mm):
1. Open the window sash and place the extra window panel on the windowsill.
2. Slide the adjustment panel to fit the window frame width.
3. Secure the window panel to the windowsill with four large wood screws and four slider
brackets.