5
Preparations for Installing the Window Kit
You must vent your portable air conditioner when running it in Cool or Dry (Dehumidify) mode.
Your unit includes a window exhaust kit that can be used to vent the unit out of a window.
Before you begin, make sure that you have all the parts necessary for installation and that a
suitable location is picked.
If you have multiple windows, choose one that is near an electrical outlet that will be able to
provide sufficient power to your unit. See the power requirements listed on the product label
printed on the side, or on the back of your portable air conditioner.
Please follow the installation instructions carefully to avoid personal injury or damage.
Window Kit Installation Instructions
The window kit can be installed in either a double-hung sash window or in a sliding sash window.
Please refer to the instructions below that pertain to your specific window type.
Installation in a Double-hung Window
1. Attach Grille
Attach the protective grille (baffle) to the window panel. Push the grille firmly to ensure that its
four raised tabs are attached firmly into the window panel.
To Next Page
Loading...
Need help?
General
