EdgeStar BR1000SS - EdgeStar Limited Warranty; Warranty Coverage Details; Warranty Exclusions; How to Obtain Warranty Service

16
8.5 Compressor
Rear cover and compressor compartment
1) Using a Phillips screwdriver remove the
screws holding the back cover plate of
compressor chamber.
2) Move the back cover plate of compressor
chamber upward.
Compressor terminal box
Remove the screws: Two screws outside, one
screw inside.
Remove the clip: Slowly pull it out
Remove the protective cover:
1）Pry the protective cover slowly from the
upper part with a screwdriver.
2）Pull it out and remove it.