7
3. Installation
3.1 Handling
1) Protect the refrigerator when moving it please
move it by handcart with cushion
2) Remove all packing materials then move into
house for placement
2) Move unit to appropriate installation location and
wait 2 hours before turning on. This allows the
refrigerant oil to settle after shipping.
3.2 Installation location
A location that has good ventilation must be chosen
to facilitate heat dissipation, enhance the unit’s
performance and reduce energy consumption. The
unit should have a minimum clearance of 4cm (1.6
inches) from walls at the rear and both sides.
To Next Page
Loading...
