How to fix an EdgeStar Dishwasher that will not start?
First, check if the dishwasher is receiving electrical power by inspecting the connection and the fuse/circuit breaker. Make sure the door is fully closed and latched. Finally, ensure the dishwasher is level. If it is not, level the unit.
Why are my dishes not clean after using the EdgeStar Dishwasher?
Several factors can cause this. Ensure dishes are arranged so the spray action reaches all surfaces and that you are not overloading the dishwasher. Check the spray arm to make sure nothing is obstructing its rotation, including a dislodged filter screen. Use enough recommended dishwasher detergent that is not hard or cracked. Remove excess food from dishes before loading, and ensure the water inlet hose isn't kinked. Lastly, verify the filter is correctly positioned.
Why are glasses getting chipped in my EdgeStar Dishwasher?
Chipped or broken glasses can occur due to improper loading of dishes. Avoid overloading the dish rack, and only load glassware on the bottom rack.
General| Type | Portable |
|---|---|
| Capacity | 6 Place Settings |
| Wash Cycles | 6 |
| Energy Star Rated | Yes |
| Voltage | 120V |
| Frequency | 60 Hz |
| Color | White |
| Installation Type | Countertop |
| Water Consumption | 3.5 gallons |
| Noise Level | 52 dB |
Specifies the optimal incoming water pressure range for the dishwasher.
Guidance on detergent quantity based on water hardness.
Explains the function and usage of rinse aid for better results.
Lists key technical specifications like power, dimensions, and water pressure.
Explains error codes and their possible causes for troubleshooting.
To Next Page
