How to troubleshoot an EdgeStar DWP61ES Dishwasher that does not start?
If your EdgeStar Dishwasher doesn't start, first check the fuse or circuit breaker and replace or reset it, removing any other appliances from the same circuit. Also, ensure the dishwasher is turned on, the door is securely closed and latched, and the power cord is properly plugged into the wall socket.
Why are dishes not cleaned in my EdgeStar DWP61ES Dishwasher?
If your EdgeStar Dishwasher isn't cleaning dishes properly, it might be due to improper loading. See notes in loading the dishwasher (pg. 8). Also, the wash cycle may not be powerful enough, so select a more intensive wash cycle (see pg. 7). Ensure you're using enough detergent or try a different brand. Check that items aren't blocking the spray arms and rearrange them if needed. Finally, make sure the filter combination in the base of the dishwasher is clean and correctly installed (pg. 14).
What to do if water is not pumped from EdgeStar Dishwasher?
If your EdgeStar Dishwasher isn't pumping water out, examine the drain hose for any kinks. Also, check the coarse filter for clogs. Ensure that your kitchen sink is draining properly; if it isn't, consult a plumber.
Why are the dishes not dry after using my EdgeStar DWP61ES Dishwasher?
If your EdgeStar Dishwasher leaves dishes wet, ensure you're loading it correctly according to the instructions. Refill the rinse-aid dispenser and consider increasing the amount dispensed. Avoid removing dishes too soon after the cycle finishes. Select a more intensive wash cycle (pg. 7), as short cycles have lower cleaning performance. Be aware that the dishwasher is not suitable for cutlery with a low-quality coating.
Why is detergent left in the dispenser cup of my EdgeStar DWP61ES Dishwasher?
If you find detergent left in the dispenser cup of your EdgeStar Dishwasher, it's likely that dishes are blocking the detergent cups. Re-load the dishwasher according to the instructions to ensure proper detergent dispensing.
How to get rid of suds in EdgeStar DWP61ES Dishwasher?
If you see suds in the tub of your EdgeStar Dishwasher, it's likely due to using the wrong detergent or spilled rinse-aid. Use only the specified detergent. If you used an improper detergent, open the dishwasher to let the suds evaporate, then add 1 gallon of cold water to the tub. Close and latch the door, and start the “SOAK” wash cycle to drain the water. Repeat if needed. Always clean up rinse-aid spills immediately.
Why is there cloudiness on glassware after using my EdgeStar DWP61ES?
Cloudiness on glassware in your EdgeStar Dishwasher can result from using too much detergent with soft water. Try using less detergent and/or selecting the shortest wash cycle for glassware. The filter may also be dusty or blocked, so clean the filter and replace it if needed (pg.14).
How to remove black or gray marks on dishes from EdgeStar DWP61ES?
If you notice black or gray marks on dishes from your EdgeStar Dishwasher, it may be due to utensils rubbing against the dishes. You can use a mild abrasive cleaner to remove these marks. Load the dishwasher carefully to prevent this issue.
What causes a knocking noise inside my EdgeStar DWP61ES Dishwasher?
A knocking noise inside your EdgeStar Dishwasher indicates that the spray arm is hitting an item in the dish rack. Pause the wash cycle and rearrange the items that are blocking the spray arm's movement.
Why is my EdgeStar DWP61ES making a rattling noise?
A rattling noise inside your EdgeStar Dishwasher means an item isn't securely placed in the dish rack. Pause the wash cycle and secure the items.
General| Model Number | DWP61ES |
|---|---|
| Capacity | 6 Place Settings |
| Noise Level | 52 dB |
| Energy Star Rated | No |
| Voltage | 120 V |
| Hose Length | 5 feet |
| Type | Portable Countertop Dishwasher |
| Wash Cycles | 6 |
Warning about hydrogen gas production in water heaters and safety precautions.
Guidelines for safe installation and professional servicing of the dishwasher.
Key safety and usage rules for operating the dishwasher, including child safety.
Instructions for safe removal of packaging materials and initial checks before installation.
Covers clearance, water, and electrical needs for countertop installation.
Specifies power supply voltage, frequency, and grounding requirements for safe operation.
Step-by-step guide to connect the faucet adapter, drain hose, and inlet hose.
Procedures to safely disconnect power, water supply, and hoses, releasing pressure.
Guide to diagnose and resolve common problems like start failure, water issues, and suds.
Details 1-year parts and 90-day labor warranty coverage and limitations.
To Next Page
