13
Use Jet-Dry Rinse Agent
Jet-Dry nts new film build-up on
your di
Filling
The rin holds 3.5 oz. of rinse agent. Under normal
conditio nth. Try to keep it full, but
o not overfill.
.Turn the dispenser knob to the left and lift it out.
3.Add rinse agent until the indicator window looks full.
.Clean up any spilled rinse agent with a damp cloth.
.Replace the dispenser knob.
he final wash can be adjusted.
he factory setting is at the midpoint. If there are rings of calcium
e
rinse agent removes spots and preve
shes, glasses, flatware, cookware and plastic.
the Dispenser
se agent dispenser
ns, this will last approximately one mo
d
1.Make sure the dishwasher door is fully open.
2
4
5
Rinse Aid Setting
The amount of rinse agent released into t
T
(hard water) spots on dishes, try a higher setting.
To adjust the setting
Remove the dispenser knob; then turn the adjuster counterclockwis
to increase the amount of rinse agent.
Only use branded rinse aid for the dishwasher. Never
fill the rinse aid dispenser with any other substances
such as liquid detergent.
To Next Page
Loading...
Need help?
General
