What to do if my EdgeStar BIDW1802 is leaking (Error E4)?
If your EdgeStar Dishwasher is showing error code E4, it indicates a leak. You should: * Check the amount of detergent used. * Make sure the unit is level. * Check the float switch. * Check the drain pump. * Check the amount of water being let in. * Find the leak location.
How to troubleshoot E1 error on EdgeStar BIDW1802?
To troubleshoot the E1 error on your EdgeStar Dishwasher, you should check the following: * Water supply * Inlet valve * Inlet line * Flow meter * Pressure switch * Drain * PCB
Why does my EdgeStar BIDW1802 Dishwasher show E6 E7 error?
If your EdgeStar Dishwasher displays error codes E6 or E7, you should check the water inlet temperature, the thermistor, and the PCB.
What to do if my EdgeStar BIDW1802 Dishwasher shows error E3?
If your EdgeStar Dishwasher shows error code E3, you should check the heater, the thermistor, and the PCB.
Provides essential safety guidelines for operating and maintaining the dishwasher, emphasizing user caution.
Details critical safety measures related to electrical connections, grounding, and power handling for the dishwasher.
Illustrates the exterior front and top perspectives of the dishwasher, highlighting key external components.
Shows the internal layout of the dishwasher, including the basin and detergent/rinse aid compartments.
Details the components located on the underside of the dishwasher, including valves and pumps.
Instructions for accessing and removing the dishwasher's control panel and user interface board.
Procedure for removing and replacing the water inlet valve assembly.
Step-by-step guide for removing and replacing the drain pump assembly.
Details on how to remove and service the wash pump and its motor.
Instructions on entering the diagnostic mode for testing dishwasher functions.
List of diagnostic error codes, their meanings, and possible causes.
General| Model Number | BIDW1802 |
|---|---|
| Number of Wash Cycles | 6 |
| Noise Level | 52 dBA |
| Energy Star Rated | Yes |
| Color | Stainless Steel |
| Voltage | 120V |
| Frequency | 60 Hz |
| Drying System | Condensation Drying |
| Dimensions | 34.63 x 23.63 x 24.5 inches |
| Dimensions (H x W x D) | 34.63 x 23.63 x 24.5 inches |
To Next Page
