5
Heineken brand DraughtKeg tapping instructions
Heineken brand DraughtKeg™ mini kegs have an internal CO
2
tank. This
is the only type of mini keg that you can tap without the optional
accessory kit.
1. Chill the mini keg
2. Open the door of the mini kegerator.
3. Place the mini keg near the open door.
4. Make sure the top of the mini keg looks like this:
5. Attach the Heineken-style tap to the beer line:
6. Attach the Heineken-style tap and beer line assembly to the mini
keg:
7. Place the mini keg inside the mini kegerator and shut the door.
8. Pour your first glass of beer!
9. When the keg is completed, remove the Heineken-style tap from
the keg by squeezing the two tabs on top of it and pulling it off.
10. Detach the tap from the beer line by pressing the white/gray
button and pulling the line off.
11. Rinse the tap under running water. You should also clean it with a
mild detergent solution and rinse it thoroughly.
12. Clean the beer lines as noted above.
Note: Heineken reports that a tapped Heineken brand DraughtKeg will
remain fresh for up to 30 days after tapping (provided it remains
refrigerated).
To Next Page
Loading...
Need help?
General
