EdgeStar VBM91SS - Reversing the Door Swing

14
Warning: Before you begin, unplug the Refrigerator.
!
Reversing the Door Swing
1a.Usingaatheadscrewdriveroratblade,carefullypryo󰀨thedecorativeplugsontheopposite
upper side of the cabinet.
1b. Using a M5 hex key (Allen wrench), remove the lower door support from the opposite bottom side
of the cabinet.
2. While another person holds the door, use a M5 hex key, remove the door hinge pins from the top
and bottom of the door. Using two or more people, remove the door and set aside.
3. Using a M5 hex key, remove the upper and lower door hinge.
4. Install the upper and lower door hinge on the opposite side of the cabinet.
5. Rotate the door 180° and install the door by securing the door hinge pins into the upper and lower
door hinge as well as the door.
6. Install the lower door support and decorative plugs on the opposite side of the cabinet.
Warning: Use two or more people to reverse the door swing of the commercial refrigerator.
Failure to do so can result in back or other injury.
!