EdgeStar VBM91SS - Page 20

20
Symptoms Possible Causes Solutions
The unit is not level or is
touching another appliance.
Check to make sure that the
refrigerator is level, and that it is not
in contact with another appliance or
furniture.
The body of the commercial
refrigeratoriselectried.
The unit is not grounded
properly.
Contact your local electrician to test
your electrical grounding system.
Frost is forming in the
commercial refrigerator.
The environment is humid. Though the unit uses an “auto-
defrost” system, under certain
conditions, manual defrosting may be
required. If frost builds up, you can try
running the refrigerator on a warmer
temperature setting, minimizing the
number of times you open the door, or
unplugging the unit to allow the frost
to melt.
The ambient temperature is
too low.
Ensure that the refrigerator is in a site
with an ambient temperature between
50° F and 90° F.
The door is being opened
too frequently.
Try to open the door less frequently
or raise the set temperature of the
refrigerator.
The door will not shut
properly.
The refrigerator is not level. Make sure the refrigerator is on a level
surface.
The door gasket is dirty. Clean the door gasket.
The door gasket is not
installed correctly.
Make sure the door gasket is correctly
installed.
The shelves are incorrectly
installed.
Install the shelves correctly.