v
We, the employees at EdgeTech, would like to thank you for purchasing 4125 Magnetometer Interface.
At EdgeTech, it is our policy to provide high-quality, cost-effective products and support services that
meet or exceed your requirements. We also strive to deliver them on-time, and to continuously look for
ways to improve them. We take pride in the products we manufacture, and want you to be entirely
satisfied with your equipment.
The purpose of this manual is to provide the user with information on the setup and use of EdgeTech’s
4125 Mag Interface. Although this manual encompasses the latest operational features of the 4125 Mag
Interface, some features may be periodically upgraded. Therefore, the information in this manual is
subject to change and should be used for reference only.
EdgeTech has made every effort to document the 4125 Mag Interface in this manual accurately and
completely. However, EdgeTech assumes no liability for errors or for any damages that result from the
use of this manual or the equipment it documents. EdgeTech reserves the right to upgrade features of
this equipment, and to make changes to this manual, without notice at any time.
Warnings, Cautions, and Notes
Where applicable, warnings, cautions, and notes are provided in this manual as follows:
WARNING!
Identifies a potential hazard that could cause injury or death.
CAUTION!
Identifies a potential hazard that could damage equipment or data.
NOTE: Recommendations or general information that is particular to
the material being presented.
To Next Page
Loading...
