Edgetech 4125 - SECTION 2: Magnetometer Setup; Configure the Tow Fish

2-1
 SECTI O N 2 :
MAGNETOMETER SETUP
In order to setup the magnetometer, the following procedures are necessary:
2.1
Configure the Tow Fish
The tow fish has a file that needs to be configured if a Baud other than the Default 9600 is to be used.
Tow fish setup:
1. Connect to the tow fish using Windows Remote Desktop on the topside computer.
a. Remote Desktop settings if needed are:
Ethernet address: 192.9.0.101
Login name: Administrator
Password: admin
2) Left Click using mouse button to select “Remote
Select OK
1) Right Click Right Click using
Password = admin