2.04.03 STARTING
Insert the plug in a suitable power socket and follow the instructions below, depending on
the kind of machine involved.
Make sure the characteristics of the work piece are compatible with the contents
of the technical specifications table.
IMPORTANT: When processing hard and fragile materials ( not included among
the functions of this tool ) metal elements (steel splinters and the like) may be
projected from the work piece and accelerate to considerable speeds.
This situation has been described in the machine instructions manual in order to
allow the operator to take the precautions required to avoid this potentially
hazardous situation, by wearing a helmet, goggles and suitable protective
clothing.
Make sure the workpiece lies at right angles with respect to the axis of the
equipment (fig. 3A).
IMPORTANT: If the machine is moved towards the workpiece, hold it still with
both hands and maintain a fixed position.
If the machine lies on a surface, keep one hand on the grip and hold the
workpiece with the other (fig. 5 by way of example )
To Next Page
Loading...