Edimax BR-6475nD Quick Installation Guide

2
Package Contents
Installation
1. Screw in the two included 3dBi
antennas to the back of the router,
and use an Ethernet cable to connect
the router’s WAN port to your
modem’s LAN port.
2. Use an Ethernet cable to
connect any LAN port on the
router to the Ethernet port on
your computer.
3. Plug the included power adapter
into the router’s 12v Power jack
and the other end into an
electrical socket.
BR-6475nD
Holding base
x2
QIG
x2
Setup Wizard CD
Power Adapter
Ethernet Cable
3dBi Antenna x2

Edimax BR-6475nD Specifications

General

Brand	Edimax
Model	BR-6475nD
Category	Wireless Router
Language	English