11
NOTE: Network security type (‘Network Authentication’ and ‘Data encryption’) will be
selected automatically based on wireless access point’s security setting. It’s not required to
change these settings by yourself.
C. Input the security setting (WEP key) and click “OK” to start network connection.
All options in this page will be filled automatically according to the access point you
wish to add to profile. However, you can still modify any of them to meet your
requirement.
You can give a name to this profile, so you can
remember its purpose easily. It can be any
phrase to help you remember.
The SSID (Service Set ID entifier, i.e. access
point‟s name). This field will be filled as the
access point you selected when SSID is not
hidden and grayed out. If SSID is hidden, you
have to input correct SSID you yourself.
This is a
computer-to-computer
(ad hoc) network
Check this box if you wish to connect to another
computer / network device by ad hoc method.
When not accessing to wireless access point,
you have to check this box.
Select wireless channel for ad hoc connection.
This option only appears when you‟re using ad
To Next Page
Loading...
Need help?
General
