Edimax PS-3103P - Page 100

The Device Cfg page allows you to set:
z Alias name, an alternate name by which the
PrintSir can be called (in addition to the
PSxxxxxx name printed on the label).
z NetWare Protocol Support, which determines
whether or not the PrintSir support NetWare
printing function.
z NetBEUI Protocol Support, which determines
whether or not the PrintSir support NetBEUI
network protocol.
z POST diagnostic printout, which determines
whether or not a diagnostic printout should be
printed to the attached printer.
z Save to PrintSir button: save the configuration
to the PrintSir.
z Type new password, change to new password.
z Re-type new password, confirm the new
password.
z Change password button: save the new
password to the PrintSir.
The PrintSir will verify your password (it will
ignore the User Name item) when you save the
configuration.
Make sure to reset the PrintSir (described in
section 8.3.11 System Utilities ) to let the changes take
effect.
100