Edision Ping T2/C - Page 15

Version of November 22th, 2021 15
2. Now go to the right side of the menu using the arrow key on the right and navigate the cursor with the up/
down arrows to the “Lock” symbol. The symbol is highlighted in color.
3. Press the OK button. The “ Lock “ symbol will appear behind the channel name in the channel list.
Note: You can lock more channels at the same time by rst highlighting the corresponding channels in the
channel list (left side menu) via the OK button and then following steps 2-3 above.
When selecting a locked channel you are prompted to enter a password. Otherwise the channel is not
shown.
How to unlock a channel:
1. Place the cursor (blue bar) in the channel list on the locked channel.
2. Now go to the right side of the menu using the arrow key on the right and navigate the cursor to the “Lock”
symbol. The symbol is highlighted in color.
3. Press the OK button. Enter the password you selected, and the channel is unlocked. In the channel list the
“Lock” symbol is removed.
Note: You can unlock more channels at the same time by rst highlighting the corresponding channels in the
channel list (left side menu) via the OK button and then following steps 2-3 above.
How to delete a channel:
1. Place the cursor (blue bar) in the channel list on the channel you want to delete.
2. Now go to the right side of the menu using the arrow key on the right and navigate the cursor to the “De-
lete” symbol. The symbol is highlighted in color.
3. Press the OK button. The channel is deleted from the list.
Note: You can delete more channels at the same time by rst highlighting the corresponding channels in the
channel list (left side menu) via the OK key and then following steps 2-3 above.
How to rename a channel:
1. Place the cursor (blue bar) in the channel list on the channel you want to rename.
2. Now go to the right side of the menu using the arrow key on the right and navigate the cursor to the “Re-
name” symbol. The symbol is highlighted in color.
3. Press the OK button.
4. A window with an input eld appears. Use the arrows and the OK key to select characters and letters. You
can delete the last character (of your entry) by navigating the cursor, in the eld with the letters, in the
symbol “<-”. You can add a space by moving the arrows to the “-” symbol. Conrm your selection by going
to the “OK” eld with the arrows. The new name is added to the channel list. You can leave the input win-
dow at any time, using the EXIT key, and thus interrupt the proce.
Exit the “Edit Channel” menu by pressing the EXIT key. If you have made changes, a dialog box appears
prompting you to conrm the changes. Selecting “Yes” changes the settings.
Note: Only if you conrm with “Yes” are the channels deleted, moved and/or locked. If you select “NO” NO
changes are saved.