A386-11-880 Issue E
Page 14 © Edwards Limited 2008. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Installation
3.6 Leak-test the installation
Leak-test the system after installation and seal any leaks found. Dangerous substances which leak from the system
will be dangerous to people and there may be a danger of explosion if air leaks into the system. We recommend that
the leak rate is 1 x 10
-5
mbar.ls
-1
(1 x 10
-3
Pa.ls
-1
) helium or less.
Leak-test the system after installation and seal any leaks found to prevent leakage of dangerous
substances out of the system and leakage of air into the system.
To Next Page
Loading...