© Edwards Limited 2008. All rights reserved. Page 17
Edwards and the Edwards logo are trademarks of Edwards Limited.
Storage and Disposal
A386-11-880 Issue E
5 Storage and Disposal
5.1 Storage
Place protective covers over the inlet and outlet-flanges of the Exhaust-Silencer and store in cool, dry conditions
until required.
When required for use, install the Exhaust-Silencer as described in Section 3.
5.2 Disposal
Dispose of the Exhaust-Silencer and any components safely in accordance with all local and national safety and
environmental requirements.
Particular care must be taken with the following:
Fluorinated materials which may have decomposed as the result of being subjected to high temperatures
Components which have been contaminated with dangerous process substances.
To Next Page
Loading...