Edwards CDP

A386-11-880 Issue E Page 2 © Edwards Limited 2008. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Introduction
Figure 1 - Components of the Exhaust Silencer
1. Cap-head bolt
2. Washer
3. End-cover plate
4. ‘O’ ring
5. Silencer body
6. 2nd-stage expansion chamber
7. Transfer tube
8. Baffle-plate
9. 1st-stage expansion chamber
10.‘O’ ring
11.‘O’ ring
12.End-cover plate
13.Outlet flange
14.Mounting hook (CDP Exhaust
Silencer only)
15.Inlet flange
16.Outlet tube