Edwards E2M28 - Page 3

CE Declaration of Conformity
P20000620L
The following product
AXXX - YY - ZZZ
Pump type Variant Motor description
XXX YY ZZZ
373 = E2M28 01 to 99 903 = 220V/240V 50/60Hz Single Phase
374 = E2M30 904 = 100V/200V 50/60Hz Single Phase
930 = 220V/240V 50/60Hz Single Phase
934 = 220V/380V 60Hz Three Phase
940 = 200-230V/380-460V 50/60Hz Three Phase
981 = 115/230V 60Hz Single Phase
984 = 110/200-240V 50/60Hz Single Phase
Is in conformity with the relevant requirements of European CE legislation:
2006/42/EC
Machinery directive
2014/34/EU
ATEX directive on use in potentially explosive atmospheres.
Intertek Testing and Certification Limited, 0359
Intertek House, Cleeve Road, Leatherhead, Surrey, KT22 7SB
ATEX marking:
II 3 G Ex h IIB T4 Gc
INTERNAL ATMOSPHERES ONLY
TCF 218
2011/65/EU
Restriction of certain hazardous substances (RoHS) directive
as amended by Delegated Directive (EU) 2015/863
Based on the relevant requirements of harmonised standards:
EN 1012-2:1996 +A1:2009
Compressors and vacuum pumps. Safety requirements. Vacuum pumps
EN 60034-30:2009
Rotating electrical machines -- Part 30: Efficiency classes of single-speed, three-phase,
cage-induction motors (IE-code)
EN 61010-1:2010 *
Safety requirements for electrical equipment for measurement, control and laboratory
use. General requirements
* 1-phase pumps only
The pumps comply with EN 61010-1 when installed in accordance with the instruction
manual supplied with the pumps.
EN ISO 80079-36:2016
Explosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres.
Basic method and requirements
EN ISO 80079-37:2016
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres --
Non-electrical type of protection constructional safety ''c'', control of ignition sources
''b'', liquid immersion ''k''
Edwards Ltd
Innovation Drive
Burgess Hill
West Sussex
RH15 9TW
UK