A344-02-880 Issue J
Page 40 © Edwards Limited 2007. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Spares and accessories
7.3 Spares
The following maintenance kits contain all of the parts you will need to maintain your pump. The maintenance kits
also include instructions for the use of the kits. Use the Clean and Overhaul Kit for routine maintenance operations.
Use the Blade Kit together with the Clean and Overhaul Kit when you must renew the blade assembly in the rotary
pump.
7.4 Accessories
A range of accessories is available for the E1M40, E2M40, E1M80 and E2M80 pumps.
7.4.1 Inlet dust-filter
The inlet dust-filter is a nylon-fibre filter-element which protects your pump against abrasive dust (see Figure 12,
item 1). You can check the filter element by looking through a glass cover at the top of the filter. The filter is supplied
with bolts, washers, 40 mm 'O' ring and centring ring.
Pump Kit Description Item Number
E1M40 and E2M40 Clean and Overhaul Kit A344-01-131
E1M40 Blade Kit A344-01-050
E2M40 Blade Kit A364-01-050
E1M40 Major Service Kit A344-01-814
E2M40 Major Service Kit A364-01-814
E1M40 Interior Assembly A344-01-100
E2M40 Interior Assembly A364-01-100
E1M80 Interior Assembly A345-01-100
E2M80 Interior Assembly A365-01-100
E1M80 and E2M80 Clean and Overhaul Kit A345-01-131
E1M80 Blade Kit A345-01-050
E2M80 Blade Kit A365-01-050
E1M80 Major Service Kit A345-01-814
E2M80 Major Service Kit A365-01-814
All models Fine oil-filter A223-04-041
All models Common Seals Kit A344-01-820
Product Item Number
ITF100 Inlet Dust Filter A442-02-000
To Next Page
Loading...
Need help?
General
