A301-05-880 Issue A
Page 24 © Edwards Limited 2014. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Operation
4.3 Shutdown
If the pump is to be shut down for a long period or is due to be shipped on, refer to Section 6.1 for the storage
instructions.
1. Close the pump inlet isolation valve (if fitted).
2. Leave the pump operating for sufficient time such that the pump is thoroughly purged of any hazardous
substances.
3. Switch off the EH pump.
4. Open the backing pump air admittance valve (if fitted) and switch off the backing pump.
5. On all of the EH1200, EH2600 and EH4200 model pumps only: turn off the cooling water supply.
To Next Page
Loading...
