HD490 Smart Encoder
33 Copyright © 2000-2012 EEG Enterprises, Inc.
All Rights Reserved.
Begin Set Output Queue <CTRL+A>8 [Channel] <ENTER>
End Set Output Queue <CTRL+C>
To set the message output queue for a Channel, first enter the Begin Set
Output Queue command. T1 is the default channel. A prompt reading
“>” should appear. Enter the desired Messages, delineated by carriage
returns, in the desired order of insertion. When the list is completed,
enter the End Set Output Queue command. A message that is associated
with a different channel cannot be added to the queue.
Display Output Queue <CTRL+A>B <ENTER>
Displays the contents of both text channel output queues.
To Next Page
Loading...
