eego amplifier EE-21x EE-22x User Manual
Rev. 5, DRN-PDO-1664 26 of 26 2016-07-11
MS Windows 7 or 8.1 (32bit, 64bit), 32 bit applications only
Debian 8.x with g++ 4.9 compiler (32bit, 64bit OS and applications)
2GB RAM working memory
USB 2.0 connection for amplifier
Control software must be compatible and designed for eego
amplifier
IEC 60950
Compliant EMC Directive 2014/30/EU, the Low Voltage Directive
2014/35/EU, the RoHS Directive 2011/65/EU, the Ecodesign
Directive 2009/125/EC, and the Radio Equipment Directive
2014/53/EU where applicable.
Warning:
Proper use of the eego amplifier depends on careful reading of all instructions and labels
that come with or are present on the device. Incorrect use of the device may cause inaccurate
measurements. Non-compliance with warnings and safety regulations may result in severe personal
injury and total loss of equipment.
Disclaimer: We have attempted to write this document as accurately as possible. However, mistakes are bound to occur, and we reserve
the right to make changes to the products, which may render parts of this document invalid. No part of this document may be copied or
reproduced without the explicit permission of the authors.
To Previous Page
Loading...
