EasyManua.ls Logo

eego EE-225 - Safety, Maintenance, and Contact Information; Eego Amplifier Safety Measures

Default Icon
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
eego amplifier EE-21x EE-22x User Manual
Rev. 5, DRN-PDO-1664 5 of 26 2016-07-11
1.4 SAFETY WARNINGS
The following warnings and cautions apply to the eego amplifier:
Proper use of the eego amplifier depends on careful reading of all instructions and labels that
come with or on the device inaccurate measurements may be caused by incorrect use of the
device.
Non-compliance with warnings and safety regulations may result in severe personal injury!
If you are uncertain or have any questions about operational safety or about any of the warnings and
cautions, then do not hesitate to call or email:
eemagine Medical Imaging Solutions GmbH
Gubener Str. 47
D-10243 Berlin, Germany
Phone: +49 30 29048404
E-Mail: support@eemagine.com
http://www.eemagine.com
For warnings and safety regulations concerning waveguard EEG caps, please refer to the
corresponding manual.
1.4.1 IMPORTANT INFORMATION
There are no known side effects from the use of this equipment.
ONLY APPLICABLE TO THE USA: Under federal law this apparatus may only be sold by or on the
order of a physician or licensed practitioner. The apparatus may only be used under the constant
supervision of or on the instructions of a physician or other authorized medical professional.
1.4.2 SAFETY MEASURES
The only external power supply that may be used is the original device supplied
together with the amplifier. DO NOT replace it with anything else. If any third-party
type of power supply is used then patient safety is not guaranteed.
Make sure that the wall socket is well earthed.
Inspect the power cord on a regular basis for damages. Do not operate the device with a
damaged power cord.
The eego amplifier contains LITHIUM-ION BATTERIES. In case of damaged amplifier housing and
to the battery cells inside the housing, metallic Lithium tends to spontaneous formation of
flames when in air contact. Make sure to quarantine any amplifier with damaged battery cells
and inform eemagine support immediately.
Do not connect active sensors or electrodes to any of the inputs of the amplifier.
Do not use the device with adapters, EEG caps or other devices not explicitly listed to be
compatible with the device.
Take care when arranging sensor cables to avoid risks of entanglement or strangulation.

Related product manuals