eego amplifier EE-21x EE-22x User Manual
Rev. 5, DRN-PDO-1664 7 of 26 2016-07-11
During operation with an active connection via USB to a compatible computer, do not connect
other USB devices, and do not make changes to any connections.
If the eego amplifier is upgraded or replaced for any reason, make sure to have the control
software and interfacing computer checked for compliance by eemagine support before
continuing to work with the device. Similarly have the eego amplifier checked for compliance
when the control software or computer is upgraded or replaced.
During operation place the device in such a way that connectors and cables are easily accessible.
Do not use sharp objects such as pencil-points or pen-tips to manipulate the buttons on the
control panel, as this may cause damage.
Do not use the device whenever parts of it are damaged.
The eego amplifier’s soft-shell must be handled with care and must not be removed from the
device. It may tear otherwise.
1.5 MAINTENANCE AND CLEANING
We would like to give a few general recommendations that may help to keep your equipment in
good shape and ensure high quality of recordings.
The amplifier is mechanically robust – within limits. Try to protect the device as much as possible
from falling and heavy mechanical shocks. Please take special care that the USB cable and the
connectors on either side are not under mechanical stress. A broken USB connection may lead to
expensive and time-consuming repair of the amplifier.
The EEG head-cap and trigger connectors may be attached to the amplifier with the available screws
on the connector in case of expected movement of the patient/subject. The screws do not need to
be extremely tight but just hold the connectors in place, so please tighten the screws gently.
The expected lifetime is 5 years.
If the amplifier requires cleaning, please use a dry cloth to remove dirt (e.g. gel remainders). Do not
use alcohol or cleaning chemicals.
1.6 DISPOSING OF WASTE EQUIPMENT
Various parts of the eego amplifier device bear the symbol for special waste
disposal regulations (EU). The symbol means that the products must not be
disposed of with regular waste. Instead, it is the user’s responsibility to dispose of
waste equipment by handing it over to a designated collection point for the
recycling of waste electrical and electronic equipment. The separate collection and
recycling of your waste equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the environment. For more
information about where you can drop off your waste equipment for recycling, please contact your
local city office, your household waste disposal service, or the manufacturer.
To Next Page
Loading...