What to do if my EemaX LavAdvantage SPEX1812T Water Heater shows undervoltage?
If your EemaX Water Heater indicates undervoltage, it means the inlet voltage is too low compared to the heater's specifications. Have certified personnel check the inlet voltage and ensure it's within the specified range.
What to do if my EemaX LavAdvantage SPEX1812T Water Heater has high flow?
If your EemaX Water Heater experiences high flow, the flow rate might be too high to heat the water to the setpoint temperature. Reduce the flow by using an outlet flow restrictor or a faucet aerator.
What to do if my EemaX Water Heater shows a freeze warning?
If your EemaX Water Heater displays a freeze warning, the inlet water temperature is too low (below 35°F). Increase the inlet water temperature above 35°F to resolve this.
General| Model | SPEX1812T |
|---|---|
| Category | Water Heater |
| Brand | EemaX |
| Series | LavAdvantage |
| Tank Capacity | Tankless |
| Weight | 7.5 lbs |
| Wattage | 18kW |
| Material | Stainless Steel |
| Temperature Range | 80°F to 140°F (26.7°C to 60°C) |
| Safety Features | Overheat protection, flow sensor activation |
| Installation | Wall Mounted |
| Certification | UL |
Follow basic safety precautions when using electrical equipment, including proper grounding.
Optimal placement, performance characteristics, and warranty considerations for LavAdvantage heaters.
Steps for connecting water pipes, including system requirements and valve recommendations.
Details on required independent circuits, wiring, and circuit breaker ratings.
Procedure to ensure water flow and switch on the electrical power for initial startup.
Explains how to use the control buttons and interface for operation, setting temperature, and advanced functions.
Lists common error codes, their causes, heater responses, and possible solutions.
To Next Page
