TOOLS AND SUPPLIES REQUIRED
Double-Sided
Foam Tape
Modelling
Knife
Needle Nose
Pliers
Small Phillips
Screwdriver
Adjustable
Wrench
This section describes our recommendations to help you in deciding which accessories to purchase for your new helicopter.
ITEMS NEEDED FOR ASSEMBLY
RECOMMENDED ITEMS FOR FLIGHT
l
The transmitter you choose must feature CCPM mixing capability.
l
A factory-installed brushless motor is included, together with a matching brushless ESC.
l
We strongly suggest the use of ball raced servos.
Impulse Power
3 Cell 2100~2500mAh
Li-Po Battery
5 - 6 Channel
Transmitter with 120°
CCPM Heli MIxing
Futaba
S3154
Tail Servo
x 1
Micro Gyro
Cirrus 6 or More
Channel Micro Receiver
Pro-Peak
Prodigy II Li-Po
Battery Charger
Thread
Lock
Assorted Hex
Wrenches
Nylon Cable
Ties
Scissors
Cirrus
CS302BB
Servos x 3
Suitable
Connectors for
Battery to ESC
To Next Page
Loading...