Efco 8530 - Preparation for Cutting

16
Italiano FrançaisEnglish
DISPOSITIVI DI TAGLIO CONSIGLIATI DISPOSITIFS DE COUPE PRÉCONISÉSRECOMMENDED CUTTING DEVICES
1. Lama di nylon 4 denti – Ø 10”/255 mm
2. Lama di nylon 3 denti – Ø 10”/255 mm
5. Disco “Pro Trim Professional” 3 lame – Ø 12”/315
mm
6. Testina “Batti e vai” Ø 160 mm – 2  li nylon Ø 3.3 mm
(8460-8530-8550 BOSS)
7. Testina “Batti e vai” Ø 130 mm – 2  li nylon Ø 3 mm
(8460IC-8530IC)
8. Testina “Batti e vai” Ø 130 mm – 2  li nylon Ø 3 mm
(8460-8530-8550 BOSS)
9. Testina “Multiline” Ø 2.75”/73 mm – 8  li quadrati lato
3.3 mm
10. Testina “Multiline” Ø 5.2”/137 mm – 8 fili
quadrati lato 3 mm
11. Lama per erba Ø 12”/305 mm, spessore 1.6 mm
12. Disco 3 denti Ø 10”/255 mm, spessore 1.4 mm
13. Disco 3 lame  sse Ø 10”/255 mm, spessore 1.4 mm
14. Disco 3 denti Ø 10”/255 mm, spessore 1.8 mm
15. Disco 3 denti Ø 12”/305 mm, spessore 2.4 mm
17. Disco 4 denti Ø 10”/255 mm, spessore 1.4 mm
19. Disco 8 denti Ø 10”/255 mm, spessore 1.4 mm
20. Disco 22 denti Ø 8”/200 mm, spessore 1.6 mm
22. Disco 60 denti Ø 10”/255 mm, spessore 1.8 mm
24. Disco 80 denti Ø 10”/255 mm, spessore 1.4 mm
26. Coltello 3 lame Ø 12”/305 mm, spessore 3 mm
ATTENZIONE - L’utilizzo di dispositivi di taglio
non approvati dal costruttore può condurre a situazioni
di pericolo.
1. Lame nylon 4 dents – Ø 10”/255 mm
2. Lame nylon 3 dents – Ø 10”/255 mm
5. Disque “Pro Trim Professional” 3 lames – Ø 12”/315
mm
6. Tête “Tap and go” Ø 160 mm – 2  ls nylon Ø 3.3 mm
(8460-8530-8550 BOSS)
7. Tête “Tap and go” Ø 130 mm – 2  ls nylon Ø 3 mm
(8460IC-8530IC)
8. Tête “Tap and go” Ø 130 mm – 2  ls nylon Ø 3 mm
(8460-8530-8550 BOSS)
9. Tête “Multiline” Ø 2.75”/73 mm – 8  ls carrés côté 3.3
mm
10. Tête “Multiline” Ø 5.2”/137 mm – 8  ls carrés côté 3
mm
11. Lames pour l’herbe Ø 12”/305 mm, épaisseur 1.6 mm
12. Disque 3 dents Ø 10”/255 mm, épaisseur 1.4 mm
13. Disque 3 lame  xes Ø 10”/255 mm, épaisseur 1.4 mm
14. Disque 3 dents Ø 10”/255 mm, épaisseur 1.8 mm
15. Disque 3 dents Ø 12”/305 mm, épaisseur 2.4 mm
17. Disque 4 dents Ø 10”/255 mm, épaisseur 1.4 mm
19. Disque 8 dents Ø 10”/255 mm, épaisseur 1.4 mm
20. Disque 22 dents Ø 8”/200 mm, épaisseur 1.6 mm
22. Disque 60 dents Ø 10”/255 mm, épaisseur 1.8 mm
24. Disque 80 dents Ø 10”/255 mm, épaisseur 1.4 mm
26. Lames 3 dents Ø 12”/305 mm, épaisseur 3 mm
ATTENTION - L’utilisation d’accessoires de coupe
non approuvé par le constructeur peut entraîner des
situations à risque.
1. 4-tooth nylon blade – Ø 10”/255 mm
2. 3-tooth nylon blade – Ø 10”/255 mm
5. “Pro Trim Professional” disc 3-blade – Ø 12”/315 mm
6. “Tap and go” head Ø 160 mm – 2 nylon lines Ø 3.3 mm
(8460-8530-8550 BOSS)
7. “Tap and go” head Ø 130 mm – 2 nylon lines Ø 3 mm
(8460IC-8530IC)
8. “Tap and go” head Ø 130 mm – 2 nylon lines Ø 3 mm
(8460-8530-8550 BOSS)
9. “Multiline” head Ø 2.75”/73 mm – 8 square lines 3.3
mm sides
10. “Multiline” head Ø 5.2”/137 mm – 8 square lines 3 mm
sides
11. Grass blade Ø 12”/305 mm, 1.6 mm thickness
12. 3-tooth disk Ø 10”/255 mm, 1.4 mm thickness
13. 3- xed teeth blade Ø 10”/255 mm, 1.4 mm thickness
14. 3-tooth disk Ø 10”/255 mm, 1.8 mm thickness
15. 3-tooth disk Ø 12”/305 mm, 2.4 mm thickness
17. 4-tooth disk Ø 10”/255 mm, 1.4 mm thickness
19. 8-tooth disk Ø 10”/255 mm, 1.4 mm thickness
20. 22-tooth disk Ø 8”/200 mm, 1.6 mm thickness
22. 60-tooth disk Ø 10”/255 mm, 1.8 mm thickness
24. 80-tooth disk Ø 10”/255 mm, 1.4 mm thickness
26. 3-blade knife Ø 12”/305 mm, 3 mm thickness
WARNING –  e use of cutting devices not authorised
by the manufacturer can generate safety risks.
p.n. 61112061
p.n. 63019007B
8. p.n. 61112059