Efco ERGO 8465 - Dispositivi DI Taglio Consigliati; Recommended Cutting Devices; Dispositifs de Coupe Préconisés

16
Italiano FrançaisEnglish
DISPOSITIVI DI TAGLIO CONSIGLIATI DISPOSITIFS DE COUPE PRÉCONISÉSRECOMMENDED CUTTING DEVICES
1. Lama di nylon 4 denti – Ø 10”/255 mm
2. Lama di nylon 3 denti – Ø 10”/255 mm
5. Disco “Pro Trim Professional” 3 lame –
Ø 315 mm
7. Testina “Batti e vai” Ø 130 mm – 2 li nylon
Ø 3 mm
9. Testina “Multiline” Ø 3.15”/80 mm – 8 li quadrati
lato 3.5 mm
10. Testina “Multiline” Ø 5.2”/137 mm – 8 fili
quadrati lato 3 mm
11. Lama per erba Ø 12”/305 mm, spessore
2.5 mm
12. Disco 3 denti Ø 10”/255 mm, spessore 1.4 mm
13. Disco 3 lame sse Ø 10”/255 mm, spessore
1.4 mm
14. Disco 3 denti Ø 10”/255 mm, spessore 1.8 mm
15. Disco 3 denti Ø 12”/305 mm, spessore 2.4 mm
17. Disco 4 denti Ø 10”/255 mm, spessore 1.4 mm
19. Disco 8 denti Ø 10”/255 mm, spessore 1.4 mm
22. Disco 60 denti Ø 10”/255 mm, spessore
1.8 mm
24. Disco 80 denti Ø 10”/255 mm, spessore 1.4 mm
ATTENZIONE - L’utilizzo di dispositivi di
taglio non approvati dal costruttore può condurre a
situazioni di pericolo.
1. Lame nylon 4 dents – Ø 10”/255 mm
2. Lame nylon 3 dents – Ø 10”/255 mm
5. Disque “Pro Trim Professional” 3 lames –
Ø 315 mm
7. Tête “Tap and go” Ø 130 mm – 2 ls nylon
Ø 3 mm
9. Tête “Multiline” Ø 3.15”/80 mm – 8 ls carrés côté
3.5 mm
10. Tête “Multiline” Ø 5.2”/137 mm – 8 ls carrés côté
3 mm
11. Lames pour l’herbe Ø 12”/305 mm, épaisseur
2.5 mm
12. Disque 3 dents Ø 10”/255 mm, épaisseur 1.4 mm
13. Disque 3 lame xes Ø 10”/255 mm, épaisseur
1.4 mm
14. Disque 3 dents Ø 10”/255 mm, épaisseur 1.8 mm
15. Disque 3 dents Ø 12”/305 mm, épaisseur 2.4 mm
17. Disque 4 dents Ø 10”/255 mm, épaisseur 1.4 mm
19. Disque 8 dents Ø 10”/255 mm, épaisseur 1.4 mm
22. Disque 60 dents Ø 10”/255 mm, épaisseur
1.8 mm
24. Disque 80 dents Ø 10”/255 mm, épaisseur
1.4 mm
ATTENTION - L’utilisation d’accessoires
de coupe non approuvé par le constructeur peut
entraîner des situations à risque.
1. 4-tooth nylon blade – Ø 10”/255 mm
2. 3-tooth nylon blade – Ø 10”/255 mm
5. “Pro Trim Professional” disc 3-blade – Ø 315
mm
7. “Tap and go” head Ø 130 mm – 2 nylon lines
Ø 3 mm
9. “Multiline” head Ø 3.15”/80 mm – 8 square lines
3.5 mm sides
10. “Multiline” head Ø 5.2”/137 mm – 8 square lines
3 mm sides
11. Grass blade Ø 12”/305 mm, 2.5 mm thickness
12. 3-tooth disk Ø 10”/255 mm, 1.4 mm thickness
13. 3-xed teeth blade Ø 10”/255 mm, 1.4 mm
thickness
14. 3-tooth disk Ø 10”/255 mm, 1.8 mm thickness
15. 3-tooth disk Ø 12”/305 mm, 2.4 mm thickness
17. 4-tooth disk Ø 10”/255 mm, 1.4 mm thickness
19. 8-tooth disk Ø 10”/255 mm, 1.4 mm thickness
22. 60-tooth disk Ø 10”/255 mm, 1.8 mm
thickness
24. 80-tooth disk Ø 10”/255 mm, 1.4 mm thickness
WARNING – e use of cutting devices not
authorised by the manufacturer can generate safety
risks.
9.
p.n. 4180058