Content
1 Presentation 4
2 Warranty conditions 5
2.1 Limitation of liability 6
3 Safety 7
3.1 General safety instruction 7
3.2 Transport and storage 7
3.3 Placement 7
3.4 Connection 8
3.5 Operation 8
3.6 Handling batteries 9
3.7 Maintenance, servicing and faults 10
4 Introduction 11
5 System description 12
6 Description of MKD series 13
6.1 Handling elements on the front side 13
6.1.1 LCD display 14
6.1.2 Buttons 15
6.1.3 LED display 16
6.2 Elements on the back side 17
6.3 Acoustic alert signs of the UPS 20
7 Storage and unpacking 21
7.1 Storage of the UPS 21
7.2 Unpacking the equipment 21
8 Installation and connecting of the UPS 22
8.1 Connecting the UPS 23
8.2 Communicational interface of the UPS 24
8.3 Connection between UPS and battery pack 24
8.4 Connection sequence 25
9 Operating and controlling the equipment 26
9.1 Operating of the UPS 26
9.1.1 Operating modes and signals 26
9.1.2 Measured value display 29
9.2 Instruction manual of the UPS 30
9.2.1 Switching-on and starting the UPS 30
9.2.2 Switching-off and power down the UPS 31
9.2.3 Changing the basic setting 31
9.2.4 Starting the testing mode 33
9.2.5 Communication 33
10 Setting-up of the UPS 34
11 Troubleshooting 35
To Next Page
Loading...
