23
Removing and replacing components
CPU and CPU cooling assembly
The CPU is installed in a Zero Insertion Force (ZIF) socket on the motherboard. Before
removing the CPU from its socket, disconnect the CPU fan cable from the motherboard
and remove the cooling assembly from the CPU socket (see page 24). The CPU cooling
assembly consists of a fan, a clamp, a heatsink, and a bracket. Always replace both the
CPU and the cooling assembly when you decide to replace either.
NOTE: You should not need to remove the fan from the heatsink. A replacement cooling
assembly ships with the fan already attached.
FIGURE L CPU cooling assembly
Follow standard ESD precautions while handling the motherboard and all components.
Clamp
CPU fan
Heatsink
Bracket
CPU
To Next Page
Loading...
