48
System software
11. Select the name of the language you want to use and press OK.
12. If the Select Market Region screen appears, select the name of the region for the
Fiery X3eTY and press OK.
N
OTE: This screen appears only if English was selected from the language selection screen.
13. At the Setup screen, select Run Setup and press OK. Reenter the customer’s settings
from the Configuration page that you printed earlier.
Enter settings for Server, Network, and Printer Setup, in that sequence. Ignore the
settings not included on the Configuration page if it is more appropriate for the site
administrator to set them. For more information, see Configuration and Setup on the User
Documentation CD.
14. After all setup options are configured, select Exit Setup from the Setup screen and
press OK.
The Fiery X3eTY reboots with the updated system software and setup options.
15. Allow the Fiery X3eTY to reach Idle.
To Next Page
Loading...
Need help?
General
