Interpreting error messages
The eFlow display shows coded
error messages to help diagnose
problems with the bike. These
messages appear automatically if
the system senses an issue.
The most common error message
you may see is Error 13: “Comm
Error”. If this error comes up,
it means that the display is
connected to the bike but cannot communicate with the main
controller (located in the bike’s downtube).
Make sure the bike’s battery is installed and fully charged. Check
all connections between the display and the controller, the battery
and the controller, and the display and its mounting bracket. Re-
mount the display, making sure it engages the mount fully.
If problems persist, or for information on other error codes, please
contact Currie Tech customer service.
p. 33/52
To Next Page
Loading...